Models

New for 2014 is Pro-Drive’s “EFI”  Electronic Fuel Injection Performance Feature

  • Available for 35 and 36 horsepower engines as an added option on new or existing models.
  • Replaces old technology carburetor systems.
  • Keeps your Vanguard engine performing under the “rev limited” 4700 rpm, in safe range.
  • Tunes engine while running according to conditions.
  • Totally improves startup and idle.
  • Improves throttle response.
  • Improves fuel economy.
  • Increases load carrying and top speed by 15% or more.
  • Pro-Drive’s bolt on “EFI” System increases performance and reliability without removing, disassembling, and reassembling your engine with modified parts.

*Note: Hydralic Power trim in included as a standard feature on all motors. Manual Trim is no longer available.

X36 (No Reverse) – $6170

X36 (Reverse) – $6645

X36 (Auto Reverse) – $7670

 

Pro-Drive’s Marine Series 36 HP Vanguard Big Block V-Twin is designed for heavy-duty use in harsh waterfowling environments. The engine features digital CDI ignition, a lightweight flywheel, stainless-steel muffler, high-capacity fuel pump and 20/50 Amp Alternator for running accessories such as a spotlight and GPS. In addition to Pro Drive’s Full Power Reverse feature is the Automatic Full Power Reverse, which was heavily requested from hunters with console steering rigs. This feature rotates the prop 180 degrees so the motor performs as well in reverse as it does going forward.

36 HP
V-Twin Big Block Vanguard Engines

993 CC
61 cubic inches
54 lbs torque
Speed up to 30 mph
Weight: 335 lbs. loaded

Standard Features
Instant Forward and Neutral
Tach / Hour Meter
Momentary Forward Button
Hydralic Power Trim
Twist Grip Trouble Free Throttle
Aluminum and Stainless Construction
New 3 Blade  (Spline) Stainless Steel Propeller
Newly Designed Skeg & Cavitation Plate
New Deep Reduction Lower Unit
Heavy Duty Clutch System

Motor Options
Long Shank 20″ Trans. or Short Shank 16′ Trans.  No Extra Charge
Camo Motor $175.00

 


 

New for 2014 is Pro-Drive’s is the new 25 horsepower “EFI’ Electronic Fuel Injection”

This “EFI” System is developed and produced by Kohler and is now standard on all our 25 horsepower models

The new features of this engine include:

Easy Dependable Starts.

  • Optimized fuel injector placement and intelligent sensor pack deliver fuel wherever and whenever there is a demand for power
  • No-choke starting even in cold weather, when engine is hot or after long periods of storage
  • Less downtime and less maintenance for the life of the engine
  • No messy, gummed-up carburetor to clean or adjust

Increased Efficiency.

  • Capable of saving up to 25% in fuel over similar-size carbureted engines
  • Advanced oxygen sensor analyzes the exhaust’s air/fuel mixture
  • Upon analysis, the oxygen sensor adjusts the air/fuel mixture for optimum fuel efficiency
  • On top of the savings, you’ll also refuel less, increasing your overall efficiency 

X25 (No Reverse)     – outboard surface drive motor$5270
Note: This model did not change.  EPA  has changed how engine manufacturers have to label horsepower. Old standards were rated at 85% of horsepower produced. The new standards require them to be rated at 95% horsepower produced. Thus the decrease in labeled horsepower.

X25 (Reverse)            – $5745

X25  (Auto Reverse) – $6770

25 HP KOHLER ENGINES
725 CC  (Electronic Fuel Injection)
44 CUBIC INCHES
40 LBS. TORQUE
SPEEDS UP TO 25 MPH
Weight: 260 lbs. Loaded

Standard Features
Instant Forward and Neutral
Tach / Hour Meter
Momentary Forward Button
Hydralic Power Trim
Twist Grip Trouble Free Throttle
Aluminum and Stainless Construction
New 3 Blade  (Spline) Stainless Steel Propeller
Newly Designed Skeg & Cavitation Plate
New Deep Reduction Lower Unit
Heavy Duty Clutch System

Motor Options
Long Shank 20″ Trans. or Short Shank 16′ Trans.
Camo Motor $175.00

pdrun

Pro-Drive is built to tackle the tough jobs and extreme environments that hunters and fishermen encounter. Our motors are constructed of durable, light weight, corrosion resistant aluminum. They are compact, easily stored and trailers as any small outboard. Pro-Drive Motors are designed to provide the convenience of an outboard motor and the versatility of a mud motor. Hunters and fishermen can now travel for miles at sufficient speeds in deep water without fatigue and access areas that can only be traveled with an air cooled mud motor.

Pro-Drive Motors are equipped with an electric clutch for instant forward or neutral, providing maximum maneuverability, handling and safety. No need to lean out over the side of the boat, it’s tight turning radius assists when navigating through trails and tight spaces. Travel across slippery mud flats without losing speed, having to stand or adjust the motor. The gear reduction ratio of 1.5:1 allows the Pro-Drive to turn a large propeller giving superior performance in the mud. An adjustable trim provides additional control and eliminates tiller handle torque making longer trips much less tiring. The trim also allows you to keep the propeller running at the surface of the water or mud, reducing strain on the engine and wear on the propeller.