“X” SERIES BOATS
When Pro-Drive introduced their “X” series boat line, it was their goal to design and build a shallow draft boat to complement shallow draft outboards. After running many different boat designs, Pro-Drive discovered that a tapered chime boat runs higher and drafts less water than the typical round or semi v style boats in every condition which,
in turn, produces better speeds and higher load carrying capabilities. The tapered chime and smooth bottom gives the consumer the best maneuvering capability when running at idle or low speeds. Therefore, the “X” Series boat line has emerged.
Knowing that hunters and fisherman run in areas where they will have to cross logs, stumps and bottoms which can damage the bottom of most light duty hulls and because of its commitment to quality, Pro-Drive constructs all of its boats with 5086 grade aluminum which is 1/8″ thick. With experience from building airboat hulls in the past, Pro-Drive knew that in extreme environments, a boat that has ribs running across the width of its bottom tends to buckle in between the ribs. Therefore, Pro-Drive runs 1″ x 2″ rectangular ribs across the length (front to back) of all their boats. That along with 2″ x 2″ square tubing bracing the floor and side walls make it almost indestructible.
STANDARD FEATURES INCLUDED
- 4′ TOP DECK WITH HATCH INSIDE
- SUB FLOOR WITH NON SKID PAINT
- REAR SEAT WITH STORAGE AND UTILITY TRAY INSIDE
- MULTI POSITION SEAT / GUN BOX
- RUNNING LIGHTS WITH ANCHOR LIGHT
- GAS TANK BRACKET
- BATTERY TRAY
- PRO-DRIVE DUCK BOAT GREEN PAINT
- TAPER CHINES
- BATTERY DISCONNECT
- TROLLING MOTOR BRACKET
| “X” BOAT SIZE |
PRICE | |
| 16 X 48 (18″ SIDES) | $4820.00 | |
| 17 X 48 (18″ SIDES) | $4920.00 | |
| 18 X 48 (18″ SIDES) | $5020.00 | |
| 20 X 48 (18″ SIDES) | $5220.00 | |
| 16 X 54 (21″ SIDES) | $5120.00 | |
| 17 X 54 (21″ SIDES) | $5220.00 | |
| 18 X 54 (21″ SIDES) | $5320.00 | |
| 20 X 54 (21″ SIDES) | $5520.00 | |
| 17 X 60 (18″ SIDES) | $5220.00 | |
| 18 X 60 (18″ SIDES) | $5320.00 | |
| 20 X 60 (18″ SIDES) | $5520.00 | |
| 17 X 60 (21″ SIDES) | $5720.00 | |
| 18 X 60 (21″ SIDES) | $5820.00 | |
| 20 X 60 (21″ SIDES) | $6020.00 |
** PLEASE NOTE THAT ALL “X” SERIES BOATS ARE COMMERCIAL RATED.
THE “X” SERIES BOATS DO NOT HAVE FLOATATION OR COMPLY WITH US COAST GUARD SAFETY STANDARDS FOR RECREATIONAL BOATS.
MATERIALS
- .125 ALUMINUM BOTTOM AND SIDES
- 1″ X 2″ RECTANGULAR TUBING FOR RIBS WHICH FOLLOW THE FULL LENGTH OF THE BOAT.
- FIVE (5) RIBS ARE USED ON THE 48″ MODELS AND SIX (6) RIBS ARE USED ON THE 54″ MODELS.
- 2″ X 2″ SQUARE ALUMINUM TUBING IS USED FOR BOTTOM AND SIDE SUPPORTS.
- 2″ X 4″ ALUMINUM CHANNEL FOR UNBEATABLE TRANSOM STRENGTH
